STAINLESS STEEL DOORS
HIGH QUALITY AND INDESTRUCTIBLE
NovoPorta Clean ER-1
Stainless steel is a special material. So are stainless steel doors. Unrivalled in stability and resistance, they are specially designed for rooms where conventional materials cannot withstand atmospheric stresses or where special hygiene regulations apply.
These include laboratories, pharmaceutical, medical, chemical and food processing companies, wet rooms and sanitary facilities, as well as commercial kitchens. This is where the NovoPorta Clean ER-1 is at home, this is where it belongs.
The special thing about this door is not only its careful processing in specially equipped production halls. Despite its resistance and insensitivity, even to acidic or alkaline cleaning agents, it is still a real beauty. With its attractive surface finish in sanded or circular matt, it is an eye-catcher in any operating room. In addition, it is equipped with everything from glazing to magnetic contacts, leaving nothing to be desired.
All-round indestructible, all-round attractive.

Stainless steel
The high-quality stainless steel door is for areas where conventional materials cannot withstand atmospheric loads. The 69 mm door with a thick rebated door leaf on three sides has pressure-resistant, flat polyurethane insulation.

Well thought-out details
The doors offer many well thought-out details from stainless steel door hinges - to glazing with ISO safety glass with stainless steel glazing beads - through to elegant, attractive surfaces.

Application
The doors are used, for example, in laboratories, pharmaceutical, medical, chemical or food processing companies, wet and sanitary rooms and canteen kitchens - especially in areas with special hygiene regulations or atmospheric pollution.
Door features and highlights
Convincing details
DETAILS THAT MAKE THE DIFFERENCE
Your plus points at a glance
- High-quality and carefully crafted attractive stainless steel door with expressive surfaces
- Easily adjustable 3D hinges included as standard
- Corner frame with standard rebate screw mounting for concealed installation in the reveal
- Ideal door for high atmospheric loads and special hygiene regulations
- Insensitive to water, protects against corrosion
- Depending on requirements in material quality V2A or V4A
Technology and details
TECHNICAL DATA NOVOPORTA CLEAN ER-1
TECHNICAL DATA NOVOPORTA CLEAN ER-1
Multi-purpose service room door NovoPorta Clean ER-1 | |
Executable dimensions | |
Construction dimension (BRM) Width | min. 625 - max. 1,250 mm |
Construction dimension (BRM) height | min. 1,750 - max. 2500 mm |
Door leaf | |
Door leaf thickness | approx. 69 mm |
Sheet thickness | 1.0 mm |
Thick rebate | - |
Stainless steel material | Standard: - V2A 1.4307 (304 L) 240 grit ground |
Optional: - V2A 1.4307 (304 L) circular matt finish - V4A 1.4404 (316 L)/1.4571 (316 Ti) 240 grit ground - V4A 1.4404 (316 L)/1.4571 (316 Ti) circular matt finish | |
Opening type | DIN left or right |
Stainless steel door hinges | 3-part multi-3D hinge (2 pieces) |
Frame | |
Corner frame with 3-sided EPDM seal without floor recess, prepared for concealed rebate screw installation in the reveal | 1.5 mm |
Optionally also available as a 2-part surrounding frame or block frame | - |
Stainless steel material | Standard: - V2A 1.4307 (304 L) 240 grit ground Optional: - V4A 1.4404 (316 L)/1.4571 (316 Ti) 240 grit ground |
Lock/fitting | |
PZ mortise lock with stainless steel forend to DIN 18250, class 3 | - |
Stainless steel round lever handle set, with fixed pivot bearing, with short backplate | - |
Optionally also available as an interchangeable set or as a set with round roses | - |
Versions | |
Full leaf for interior use, thermally insulated, pressure-resistant and flat surface | Polyurethane (PUR) insulation, CFC-free |
Also with glazing | - |
Also with door retainer and/or earthing strap | - |
Also with lowerable floor seal | - |
Also with anti-panic locks (BMH 1013 PZW and PZ) | - |
Also with overhead door closer on hinge side (NFGS 55/Geze TS 5000) | - |
Also with electric strike (with and without feedback) | - |
Also with built-in NF magnetic contact and/or bolt contact (VDS class C) | - |
Available glazing types (dry glazing with rubber profile): | Standard glazing with visible screwed stainless steel glass retaining strip (always ground to 240 grain) Minimum frieze widths on 4 sides ≥ 150 mm required ¹) 500 x 400 mm, ²) 460 x 910 mm, ³) Ø 460 mm |
Special glazing of your choice | On request |
Glass types | |
With ISO glass VSG/VSG 24 mm (standard glass) | - |
With ISO glass VSG/VSG 24 mm with matt film | - |
With rectangular glazing, the screwed glazing bead is possible on the opposite hinge side as standard (also on the hinge side depending on the order). -= Possible - = Not possible |